Nice Robus 600
FOR SLIDING GATES WEIGHING UP TO 600KG
Versions with electromechanical limit switch (RB400/RB600/RB1000) and with inductive limit switch (RB400P/RB600P/RB1000P).
User-Friendly
The Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.
Practical
The control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.
Advanced
RB400, RB600 and RB1000 are equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent
Thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe
Acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. Sturdy: base and release in pressure die cast with easy to open handle.
Very quiet
Gear motor on bearings.
Documentation
Nice Robus 600
User-Friendly
The Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.
Practical
The control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.
Advanced
RB400, RB600 and RB1000 are equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent
Thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe
Acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. Sturdy: base and release in pressure die cast with easy to open handle.
Very quiet
Gear motor on bearings.
| Power Supply (VAC 60 Hz) | 120 |
|---|---|
| Absorption (A) | 2.5 |
| Power (W) | 515 |
| Speed (m/s) | 0.31 |
| Force (N) | 600 |
| Work cycle (cycles/hour) | 40 |
| Protection Level (IP) | 44 |
| Working temp. (°C Min/Max) | -20 ÷ +50 |
| Dimension (mm) | 330x210x303 h |
| Weight (kg) | 11 |
